Detroit-radiant-products-company QTS Series Manuel d'utilisateur télécharger pdf (Page 12)

Model Overall Unit Length Suspension Points Shipping Weight Chain Set Qty.

QTS-40 [N,P] 103” 3 or 4 103 lbs. 3

QTS-60 [N,P] 103” 3 or 4 103 lbs. 3

QTS-80 [N,P] 103” 3 or 4 103 lbs. 3

Heater Packaging

Heaters are made up of three pieces shipped in two boxes; the burner control box in the ﬁrst box and the

emitter assembly and reﬂectors in the second box (see Figure 3.2).

Figure 3.2 • Heater Packaging • 2 Pieces

Burner Control Box Emitter Assembly and Reﬂector Box

Chart 3.3 • Heater Mounting Requirements and Weights

Shipping Dimensions:

B = Burner Control Box (45#) & (31.5”L x 17.5”W x 15.5”H)

T = Emitter Assembly and Reﬂector Box (88#) & (91”L x 31”W x 14”H)

NOTE: See Kit Contents on page 44.

WARNING

Improper suspension of the tube heater may result in collapse and being crushed. Always

suspend from a permanent part of the building structure that can evenly support the total

force and weight of the heater.

Failure to maintain minimum clearance to combustibles may result in ﬁre and/or explosion,

property damage, serious injury or death. Always maintain minimum clearances and post

clearance safety limit signs or the clearance safety tag where needed.

QTS Series

3.0 Installation • Heater Packaging

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

Pas de commentaire

Detroit-radiant-products-company QTS Series Manuel d'utilisateur Page 12